Parameters |
Factory Lead Time |
4 Weeks |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
Series |
74HCT |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
D-Type |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Supply Voltage |
5V |
Base Part Number |
74HCT7541 |
JESD-30 Code |
R-PDSO-G20 |
Function |
Standard |
Output Type |
Tri-State, Non-Inverted |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Number of Ports |
2 |
Propagation Delay |
32 ns |
Quiescent Current |
8μA |
Family |
HCT |
Output Characteristics |
3-STATE |
Current - Output High, Low |
6mA 6mA |
Output Polarity |
TRUE |
Number of Bits per Element |
8 |
Max Propagation Delay @ V, Max CL |
32ns @ 4.5V, 50pF |
Trigger Type |
Positive Edge |
Input Capacitance |
3.5pF |
Clock Edge Trigger Type |
Positive Edge |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
RoHS Status |
ROHS3 Compliant |
74HCT7541D-Q100J Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. D flip flop is embedded in the Tape & Reel (TR) package. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. A voltage of 4.5V~5.5Vis required for its operation. It is operating at -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the 74HCT series. In total, it contains 1 elements. A total of 20terminations have been recorded. If you search by 74HCT7541, you will find similar parts. The D flip flop is powered by a voltage of 5V . JK flip flop input capacitance is 3.5pF farads. It belongs to the family of electronic devices known as HCT. It is mounted by the way of Surface Mount. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. A D flip flop with 2embedded ports is available. In order to achieve high efficiency, the supply voltage should be maintained at 5V. It consumes 8μA current.
74HCT7541D-Q100J Features
Tape & Reel (TR) package
74HCT series
74HCT7541D-Q100J Applications
There are a lot of Nexperia USA Inc. 74HCT7541D-Q100J Flip Flops applications.
- Power down protection
- Guaranteed simultaneous switching noise level
- QML qualified product
- Balanced 24 mA output drivers
- Buffered Clock
- Storage Registers
- Reduced system switching noise
- Differential Individual
- Single Down Count-Control Line
- Computing