74HCT74N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 59MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 44ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 53 ns |
| RoHS Status | ROHS3 Compliant |
74HCT74N,652 Overview
In the form of 14-DIP (0.300, 7.62mm), it has been packaged. D flip flop is included in the Tubepackage. The output it is configured with uses Differential. JK flip flop uses Positive Edgeas the trigger. Through Holeis in the way of this electric part. A 4.5V~5.5Vsupply voltage is required for it to operate. Currently, the operating temperature is -40°C~125°C TA. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74HCTseries contain this type of chip. You should not exceed 59MHzin its output frequency. The list contains 2 elements. This process consumes 40μA quiescents. Currently, there are 14 terminations. The 74HCT74family includes it. The D flip flop is powered by a voltage of 5V . The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In this case, the D flip flop belongs to the HCTfamily. It is part of the FF/Latchesbase part number family. The maximal supply voltage (Vsup) reaches 5.5V. A normal operating voltage (Vsup) should remain above 4.5V. A power supply of 5Vis required to operate it.
74HCT74N,652 Features
Tube package
74HCT series
5V power supplies
74HCT74N,652 Applications
There are a lot of NXP USA Inc. 74HCT74N,652 Flip Flops applications.
- Counters
- Asynchronous counter
- ESD performance
- Memory
- Cold spare funcion
- Instrumentation
- Dynamic threshold performance
- Differential Individual
- Buffered Clock
- Synchronous counter