74HCT7273D,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT7273 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 56MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | OPEN-DRAIN |
| Current - Output High, Low | - 4mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HCT7273D,118 Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. There is an embedded version in the package Tape & Reel (TR). T flip flop is configured with an output of Non-Inverted. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. It is at -40°C~125°C TAdegrees Celsius that the system is operating. This D latch has the type D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. This D flip flop should not have a frequency greater than 56MHz. In total, there are 1 elements. As a result, it consumes 8μA quiescent current. The number of terminations is 20. This D latch belongs to the family of 74HCT7273. It is powered from a supply voltage of 5V. This JK flip flop has a 3.5pFfarad input capacitance. This D flip flop belongs to the family of HCT. This device has the base part number FF/Latches. It reaches the maximum supply voltage (Vsup) at 5.5V. Normally, the supply voltage (Vsup) should be kept above 4.5V. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. It operates from 5V power supplies.
74HCT7273D,118 Features
Tape & Reel (TR) package
74HCT series
5V power supplies
74HCT7273D,118 Applications
There are a lot of NXP USA Inc. 74HCT7273D,118 Flip Flops applications.
- Supports Live Insertion
- Single Up Count-Control Line
- Synchronous counter
- Clock pulse
- Latch-up performance
- ESCC
- Counters
- Matched Rise and Fall
- Safety Clamp
- Digital electronics systems