74HCT4851BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 210Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74HCT4851 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2μA |
| Propagation Delay | 32 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| On-State Resistance (Max) | 210Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Number of Input Lines | 13 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Time (Ton, Toff) (Max) | 25ns, 80ns |
| Number of Output Lines | 8 |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Switch-on Time-Max | 35ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Length | 3.5mm |
| Width | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT4851BQ,115 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-VFQFN Exposed Pad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 8 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. 16 pins are injected to the electronic part body. There are 1 circuits in this multiplexer. Try searching for the analog switch ic with 74HCT4851 if you are looking for variants. Internally, this switch multiplexer has a resistance of 210Ohm. For details about the functions of 16 pins, please refer to the datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. The lowest voltage the electronic part should receive is 4.5V. It would be sufficient to run this analogue multiplexer with 2μA current. Analogue multiplexers require a 4.5V~5.5V voltage to drain from a single voltage supply.
74HCT4851BQ,115 Features
8 Channels
2μA Supply Current
74HCT4851BQ,115 Applications
There are a lot of Nexperia USA Inc. 74HCT4851BQ,115 Analog Switches & Multiplexers ICs applications.
- DVD-R
- Channelized and Unchannelized DS3 applications
- Microprocessor controlled systems
- Medical systems
- DSLAMs
- Precision data acquisition
- High speed data transmission line cards
- Industrial control systems
- CSU
- PBXs