74HCT374N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT374 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 44MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 32ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT374N,652 Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). A package named Tubeincludes it. T flip flop uses Tri-State, Non-Invertedas the output. This trigger uses the value Positive Edge. Through Holeis occupied by this electronic component. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~125°C TAis used in the operation. This electronic flip flop is of type D-Type. The FPGA belongs to the 74HCT series. Its output frequency should not exceed 44MHz Hz. The list contains 1 elements. As a result, it consumes 4μA quiescent current. A total of 20terminations have been recorded. You can search similar parts based on 74HCT374. Power is provided by a 5V supply. Its input capacitance is 3.5pF farads. HCTis the family of this D flip flop. This device is part of the FF/Latchesbase part number family. There is a 5.5Vmaximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. The power supply is 5V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.
74HCT374N,652 Features
Tube package
74HCT series
5V power supplies
74HCT374N,652 Applications
There are a lot of NXP USA Inc. 74HCT374N,652 Flip Flops applications.
- Digital electronics systems
- Synchronous counter
- Clock pulse
- ESCC
- Data Synchronizers
- Safety Clamp
- Differential Individual
- Common Clocks
- Frequency Divider circuits
- Single Down Count-Control Line