74HCT273N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Supplier Device Package | 20-DIP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 36MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 5.2mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HCT273N,652 Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). It is contained within the Tubepackage. Non-Invertedis the output configured for it. This trigger uses the value Positive Edge. Through Holeis positioned in the way of this electronic part. A 4.5V~5.5Vsupply voltage is required for it to operate. Currently, the operating temperature is -40°C~125°C TA. It is an electronic flip flop with the type D-Type. The 74HCTseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 36MHz. In total, there are 1 elements. Despite external influences, it consumes 8μAof quiescent current. The input capacitance of this JK flip flopis 3.5pF farads.
74HCT273N,652 Features
Tube package
74HCT series
74HCT273N,652 Applications
There are a lot of Rochester Electronics, LLC 74HCT273N,652 Flip Flops applications.
- Shift Registers
- Latch
- Control circuits
- Single Down Count-Control Line
- Synchronous counter
- Data storage
- Divide a clock signal by 2 or 4
- Clock pulse
- Common Clocks
- Patented noise