74HCT112D,653
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 64MHz |
| Propagation Delay | 19 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 21 ns |
| Family | HCT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Negative Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT112D,653 Overview
As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Differential. It is configured with a trigger that uses a value of Negative Edge. Surface Mountis positioned in the way of this electronic part. A supply voltage of 4.5V~5.5V is required for operation. -40°C~125°C TAis the operating temperature. This electronic flip flop is of type JK Type. This type of FPGA is a part of the 74HCT series. It should not exceed 64MHzin terms of its output frequency. Currently, there are 16 terminations. The object belongs to the 74HCT112 family. An input voltage of 5Vpowers the D latch. A JK flip flop with a 3.5pFfarad input capacitance is used here. An electronic device belonging to the family HCTcan be found here. There is an electronic component mounted in the way of Surface Mount. There are 16pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Negative Edge. Despite its superior flexibility, it relies on 2 circuits to achieve it. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It consumes 4μA current.
74HCT112D,653 Features
Tape & Reel (TR) package
74HCT series
16 pins
74HCT112D,653 Applications
There are a lot of Nexperia USA Inc. 74HCT112D,653 Flip Flops applications.
- Digital electronics systems
- Single Up Count-Control Line
- Synchronous counter
- Cold spare funcion
- EMI reduction circuitry
- Instrumentation
- Data transfer
- Parallel data storage
- Bus hold
- Consumer