74HCT109DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 55MHz |
| Propagation Delay | 17 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 13 ns |
| Family | HCT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT109DB,118 Overview
16-SSOP (0.209, 5.30mm Width)is the packaging method. The package Tape & Reel (TR)contains it. Differentialis the output configured for it. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. With a supply voltage of 4.5V~5.5V volts, it operates. It is at -40°C~125°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type JK Type. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. You should not exceed 55MHzin its output frequency. Terminations are 16. The object belongs to the 74HCT109 family. Power is provided by a 5V supply. This JK flip flop has a 3.5pFfarad input capacitance. This D flip flop belongs to the family of HCT. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 16 pins. Its clock edge trigger type is Positive Edge. Its flexibility is enhanced by 2 circuits. For high efficiency, the supply voltage should be set to 5V. As a result, it consumes 4μA of quiescent current without being affected by external factors.
74HCT109DB,118 Features
Tape & Reel (TR) package
74HCT series
16 pins
74HCT109DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT109DB,118 Flip Flops applications.
- Cold spare funcion
- Pattern generators
- Latch-up performance
- Counters
- Shift registers
- Balanced 24 mA output drivers
- Control circuits
- ESD protection
- Individual Asynchronous Resets
- Computers