74HC74D/AUJ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 14-SO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 82MHz |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 37ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HC74D/AUJ Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Differential. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 2V~6V. A temperature of -40°C~125°C TAis considered to be the operating temperature. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74HC series. In order for it to function properly, its output frequency should not exceed 82MHz. D latch consists of 2 elements. There is 40μA quiescent consumption. JK flip flop belongs to 74HC74 family. Its input capacitance is 3.5pF farads.
74HC74D/AUJ Features
Tape & Reel (TR) package
74HC series
74HC74D/AUJ Applications
There are a lot of NXP USA Inc. 74HC74D/AUJ Flip Flops applications.
- ESD performance
- Automotive
- Computers
- Guaranteed simultaneous switching noise level
- ESCC
- ATE
- 2 – Bit synchronous counter
- Buffered Clock
- Count Modes
- Shift Registers