74HC574DB,112
| Parameters | |
|---|---|
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 133MHz |
| Propagation Delay | 225 ns |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
74HC574DB,112 Overview
The flip flop is packaged in a case of 20-SSOP (0.209, 5.30mm Width). D flip flop is included in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas the output. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. It is operating at -40°C~125°C TA. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74HC series. In order for it to function properly, its output frequency should not exceed 133MHz. D latch consists of 1 elements. As a result, it consumes 8μA quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74HC574 family. The D flip flop is powered by a voltage of 5V . Input capacitance of this device is 3.5pF farads. Devices in the HC/UHfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. There are 8bits in this flip flop. As soon as 6Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be kept above 2V for normal operation. Due to its superior flexibility, it uses 8 circuits. The flip flop has 2embedded ports. For high efficiency, the supply voltage should be kept at 5V. BROADSIDE VERSION OF 374is also one of its characteristics.
74HC574DB,112 Features
Tube package
74HC series
20 pins
8 Bits
74HC574DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC574DB,112 Flip Flops applications.
- Set-reset capability
- Divide a clock signal by 2 or 4
- Event Detectors
- Patented noise
- Buffer registers
- Supports Live Insertion
- Memory
- Cold spare funcion
- Communications
- Bounce elimination switch