74HC40103PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | TCO OUTPUT; RESET TO MAX COUNT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC40103 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 475 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 475 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Down |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 32MHz |
| Timing | Synchronous |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC40103PW,118 Overview
In the 16-TSSOP (0.173, 4.40mm Width)package, it is supplied. The configuration of this device is based on 16terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. The device contains 1terminations. There are a total of 16 pins in all components. As [0], it is packaged. A circuit is connected to other components by 16pins. Using [0], it can be mounted. It is included in the HC/UHfamily. With its 74HCseries designation, it can be used for a range of applications. Binary Counteris adopted as the logic type. Ideally, the operating temperature should be set to -40°C~125°C. Using a Surface Mountmounting type, it is mounted. Providing a voltage of 2V~6Vensures higher reliability of operation. There are 8 bits stored in each element of the array. It is important to note that in regards to this electronic device, TCO OUTPUT; RESET TO MAX COUNTis an extremely significant feature. Further related parts may be found under the base part number 74HC40103. In order for it to operate, it requires a supply voltage of 5V . The minimum supply voltage (Vsup) is 2V. It is possible to provide a voltage up to 6V (Vsup). During quiescent mode, it consumes 8μA current.
74HC40103PW,118 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
8 bits per element
TCO OUTPUT; RESET TO MAX COUNT
Operating supply voltage of 5V
74HC40103PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC40103PW,118 Counters & Dividers applications.
- Binary counter/decoder
- POWER COMPUTATION
- ANALOG SIGNAL PROCESSING
- Time-delay circuits
- Timing applications
- SQUARING
- Communications Digital Frequency Synthesizers;
- Frequency division
- VHF, UHF, FM, AM, etc.
- SQUARE ROOT