74HC377N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Supplier Device Package | 20-DIP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 83MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HC377N,652 Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. It is configured with Non-Invertedas an output. JK flip flop uses Positive Edgeas the trigger. Through Holemounts this electrical part. The JK flip flop operates at 2V~6Vvolts. It is operating at a temperature of -40°C~125°C TA. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74HCseries of FPGAs. Its output frequency should not exceed 83MHz Hz. A total of 1elements are contained within it. During its operation, it consumes 8μA quiescent energy. A 3.5pFfarad input capacitance is provided by this T flip flop.
74HC377N,652 Features
Tube package
74HC series
74HC377N,652 Applications
There are a lot of Rochester Electronics, LLC 74HC377N,652 Flip Flops applications.
- Memory
- Bus hold
- ESD protection
- Automotive
- Power down protection
- Common Clocks
- Control circuits
- Guaranteed simultaneous switching noise level
- Dynamic threshold performance
- Cold spare funcion