74HC240D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Packaging | Tape & Reel (TR) |
| Published | 1995 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Inverting |
| Temperature Grade | AUTOMOTIVE |
| Voltage | 5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 150 ns |
| Family | HC/UH |
| Logic Function | Buffer, Inverter |
| Number of Inputs | 1 |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -7.8mA |
| Low Level Output Current | 7.8mA |
| Height | 2.45mm |
| Length | 13mm |
| Width | 7.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74HC240D Overview
A SOIC case is used to package the op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 20. Please take in mind that this instrumentation amplifier should be run at 5V. A total of 20 pins are present on the instrumentation amplifier. To operate this buffer amplifier, the temperature must not be lower than -40°C. At temperatures greater than 125°C, Instrumentation amplifier should not be used. The operating supply voltage of instrumentation amplifier is rated 5V voltage. With regard to the supply voltage, this electrical component is capable of working from under 6V. As a general rule, it is advisable to keep the op amp's supply voltage above 2V at all times. A 8-bit buffer op amp suitable for many applications and popular with hobbyists and technicians alike. This buffer op amp has 2 ports for managing a wide range of tasks.
74HC240D Features
supply voltage of 5V
74HC240D Applications
There are a lot of Nexperia 74HC240D Instrumentational OP Amps applications.
- Wireless base stations
- Active probe
- Proportional counter tubes
- Radiation thermometry transducers
- Weighing systems
- pH (acidity)
- Addition operation circuits
- Instrumentation
- Weak signal detection
- High/low-pass filter circuit