74HC193PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC193 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 435 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 435 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 49MHz |
| Timing | Synchronous |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC193PW,112 Overview
This is a device supplied in the 16-TSSOP (0.173, 4.40mm Width) package. It is configured with 16terminations. The supply voltage of 5V enables it operate in a fully flexible way. There are wires connecting 1elements. A total of 16pins are available on all components. Packaging is based on Tube. Circuit components are connected by 16pins. To mount it, use the method of [0]. In this case, it appears as a member of the HC/UH family. The 74HCseries offers a wide range of applications due to its versatility. The logic type of Binary Counter is adopted. It is recommended that the operating temperature be set to -40°C~125°C. Mounting type Surface Mountis used. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. It contains 4elements. An important feature of this electronic device is [0]. More related parts are available under its base part number 74HC193. The device operates on voltage [0]. Supply voltages can be as low as 2V volts (Vsup). Typically, the supply voltage (Vsup) is limited to 6V. There is a quiescent current consumption at 8μA.
74HC193PW,112 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
Operating supply voltage of 5V
74HC193PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC193PW,112 Counters & Dividers applications.
- TRUE RMS-TO-DC CONVERSION
- Analog multiplexing and demultiplexing
- Control counters
- Timers
- Timing applications
- MULTIPLICATION
- Decade counter/decimal decode display (CD4017B）
- Fixed and programmable counters greater than 10
- Binary counter/decoder
- ALGEBRAIC COMPUTATION