74HC174PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HC174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 107MHz |
| Quiescent Current | 8μA |
| Family | HC/UH |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 250 ns |
| fmax-Min | 24 MHz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC174PW-Q100J Overview
16-TSSOP (0.173, 4.40mm Width)is the way it is packaged. The package Tape & Reel (TR)contains it. It is configured with Non-Invertedas an output. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. The operating temperature is -40°C~125°C TA. D-Typeis the type of this D latch. JK flip flop belongs to the 74HCseries of FPGAs. In order for it to function properly, its output frequency should not exceed 107MHz. In total, there are 1 elements. The number of terminations is 16. Members of the 74HC174family make up this object. A voltage of 5V is used to power it. Its input capacitance is 3.5pF farads. It belongs to the family of electronic devices known as HC/UH. A part of the electronic system is mounted in the way of Surface Mount. In this case, the maximum supply voltage (Vsup) reaches 6V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. It consumes 8μA current.
74HC174PW-Q100J Features
Tape & Reel (TR) package
74HC series
74HC174PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74HC174PW-Q100J Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Buffer registers
- CMOS Process
- Latch-up performance
- Test & Measurement
- Storage registers
- Single Down Count-Control Line
- QML qualified product
- Consumer
- Balanced Propagation Delays