74HC174N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | NICKEL/PALLADIUM/GOLD (NI/PD/AU) |
| Subcategory | FF/Latches |
| Packing Method | BULK PACK |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 107MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 50 ns |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 4.7mm |
| RoHS Status | ROHS3 Compliant |
74HC174N,652 Overview
The flip flop is packaged in a case of 16-DIP (0.300, 7.62mm). It is contained within the Tubepackage. There is a Non-Invertedoutput configured with it. This trigger is configured to use Positive Edge. Through Holemounts this electrical part. With a supply voltage of 2V~6V volts, it operates. It is operating at a temperature of -40°C~125°C TA. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 107MHz. D latch consists of 1 elements. T flip flop consumes 8μA quiescent energy. 16terminations have occurred. D latch belongs to the 74HC174 family. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 3.5pFfarads. This D flip flop belongs to the family of HC/UH. It is part of the FF/Latchesbase part number family. Vsup reaches 6V, the maximal supply voltage. Normal operation requires a supply voltage (Vsup) above 2V. As a result of its reliability, this D flip flop is ideally suited for BULK PACK.
74HC174N,652 Features
Tube package
74HC series
74HC174N,652 Applications
There are a lot of NXP USA Inc. 74HC174N,652 Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Automotive
- Control circuits
- Frequency Dividers
- Instrumentation
- Convert a momentary switch to a toggle switch
- Individual Asynchronous Resets
- Single Up Count-Control Line
- Parallel data storage
- Supports Live Insertion