74HC107DB,118
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC107 |
| Function | Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 85MHz |
| Propagation Delay | 16 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | Flip-Flop, JK-Type |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 3.5pF |
| fmax-Min | 60 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 13 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
74HC107DB,118 Overview
The flip flop is packaged in 14-SSOP (0.209, 5.30mm Width). There is an embedded version in the package Tape & Reel (TR). This output is configured with Differential. There is a trigger configured with Negative Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. Currently, the operating temperature is -40°C~125°C TA. This electronic flip flop is of type JK Type. FPGAs belonging to the 74HCseries contain this type of chip. A frequency of 85MHzshould not be exceeded by its output. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74HC107family includes it. The power supply voltage is 5V. Its input capacitance is 3.5pFfarads. It belongs to the family of electronic devices known as HC/UH. The electronic part is mounted in the way of Surface Mount. A total of 14pins are provided on this board. The clock edge trigger type for this device is Negative Edge. It reaches the maximum supply voltage (Vsup) at 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. Despite its superior flexibility, it relies on 2 circuits to achieve it. For high efficiency, the supply voltage should be kept at 5V. It consumes a total of 4μA quiescent current at any given time.
74HC107DB,118 Features
Tape & Reel (TR) package
74HC series
14 pins
74HC107DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC107DB,118 Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Memory
- Functionally equivalent to the MC10/100EL29
- Memory
- Dynamic threshold performance
- Matched Rise and Fall
- Count Modes
- Patented noise
- Pattern generators
- Communications