74FCT573ATSOG
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting, Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 48mA |
| Low Level Output Current | 15mA |
| Number of Input Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT573ATSOG Overview
Package SOIC includes it. It is designed with 8 bits. This device is designed with 20 terminations. In order to operate it, the supply voltage must be 5V. The 20 pind are equipped with it. It is a member of the FCT family of electronic devices. The 20 pins are designed into it. A Surface Mount mounting method has been used for this electronic part. As far as ports are concerned, this device has 2 ports. The part is in the FF/Latches subcategory. There are 5V power supplies attached to it. An electronic circuit can be found on 8 input lines. High efficiency requires a voltage supply of 5V. A total of 1 elements make up this object. 15mA represents the low level output current. There is 48mA high level output current set. It is recommended to work at a temperature lower than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. It supports a maximum supply voltage of 5.25V. A minimal voltage of 4.75V is needed to operate it. As for the logic IC it uses, it is a BUS DRIVER.
74FCT573ATSOG Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
1 elements
74FCT573ATSOG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT573ATSOG Latches applications.
- Frequency dividing
- Synchronous frequency dividers
- OC-48 communication systems
- Up-Down Johnson
- Meter applications
- Ring counter
- Buffer register
- Up/down difference counting
- Control circuits
- Bus system register with enable parallel lines at bus side