74FCT16374CTPVG
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 500μA |
| Turn On Delay Time | 5.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 3.5pF |
| Height | 2.3mm |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT16374CTPVG Overview
SSOPis the packaging method. In total, it contains 2 elements. In 48terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The power source is powered by 5V. An electronic device belonging to the family FCTcan be found here. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 48 pins. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in FF/Latches. Flip flops designed with 16bits are used in this part. In order for the device to operate, it requires 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Optimal efficiency requires a supply voltage of 5V. This D latch consumes 500μA quiescent current at all. In addition, you can refer to the additinal POWER OFF DISABLE O/PS; IOH MAX DURATION < 1S; MAX OUTPUT SKEW = 0.5NS of the D latch. The high level output current is set to -32mA. 64mA is the low level output current. A temperature below 85°Cshould be used for operation. It is recommended that the operating temperature be greater than -40°C. A minimum supply voltage of 4.5V is required for these RS flip flops to operate. 5.5Vis the maximum supply voltage it supports. The logic IC it uses is BUS DRIVER. A total of 2 functions are provided by this T flip flop. A total of 48 pins are present on this device.
74FCT16374CTPVG Features
48 pins
16 Bits
5V power supplies
2 Functions
48 pin count
74FCT16374CTPVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT16374CTPVG Flip Flops applications.
- Clock pulse
- Memory
- Latch
- Registers
- Memory
- Computing
- Set-reset capability
- Latch-up performance
- Dynamic threshold performance
- Matched Rise and Fall