74FCT163373APVG8
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3/3.3V |
| Temperature Grade | INDUSTRIAL |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Propagation Delay (tpd) | 8.5 ns |
| Low Level Output Current | 8mA |
| Independent Circuits | 2 |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
74FCT163373APVG8 Overview
In the SSOP package, it can be found as an embedded module. An electronic part with 8 bits is designed. The device consists of 48 terminations that are designed to be used in conjunction with it. The supply voltage of the device is 3.3V. It is equipped with 48 pin count. It is part of the family of electronic devices called FCT. There are 48 pins on it. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports. The part is in the FF/Latches subcategory. 3.6V is the maximum supply voltage (Vsup). A total of 3/3.3V power supplies are required for it to operate. The device's reliable performance makes it a good choice for TAPE AND REEL. In addition, MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V characterize it. 8mA represents the low level output current. 24mA represents the high level output current. The operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. A BUS DRIVER logic IC is used.
74FCT163373APVG8 Features
SSOP package
8 Bits
48 pin count
48 pins
3/3.3V power supplies
74FCT163373APVG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT163373APVG8 Latches applications.
- Watches
- Parallel data synchronization
- Parallel Output
- Hammer
- Lamp and Display (LED)
- Counter
- General-Purpose Register
- Phase comparator
- Automotive Infotainment
- Parallel Input