74FCT162373CTPVG8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 2 |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT162373CTPVG8 Overview
In the SSOP package, it is embedded. A Tape & Reel (TR) package is used to package it. This electronic part is designed with 16 Bits. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The device works with a voltage of 5V for its supply voltage. There are 48 pins attached to it. There is a device in this electronic family called FCT. Designed with 48 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. In this device, there is a total of 2 ports available for use. There is a subcategory of FF/Latches for this part. There are 5V power supplies attached to it. As a result of its reliable performance, it is well suited for TAPE AND REEL. High efficiency requires a supply voltage of 5V. There is 24mA low level output current set. There is 24mA output current at the high level. The operating temperature should be lower than 85°C. Temperatures above -40°C should be used. It supports the maximal supply voltage of 5.5V. In order for the machine to operate, the supply voltage must be 4.5V. There is a logic IC BUS DRIVER used in the system.
74FCT162373CTPVG8 Features
SSOP package
16 Bits
48 pin count
48 pins
5V power supplies
74FCT162373CTPVG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT162373CTPVG8 Latches applications.
- Counter
- Buffer/Storage Registers
- Shift right register
- Serial Output Register
- Parallel data storage
- Up-Down Johnson
- Automatic test equipment
- Communication systems
- Counter timers
- Parallel-to-Serial Data Conversion