74F579PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 100MHz |
| Base Part Number | 74F579 |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 11.5 ns |
| Turn On Delay Time | 13.5 ns |
| Reset | Synchronous |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Number of Input Lines | 8 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F579PC Overview
A device of this type is supplied in a package of type [0]. In this diagram, there are 1elements that are interconnected by wires. As [0], it is packaged. In the circuit, 20pins are used to connect other components. Through Holeis the way in which it is mounted. Due to its membership in the 74Fseries, it is suitable for a variety of applications. It is assumed that the logic type is [0]. A temperature of 0°C~70°Cshould be set for the operating environment. There is a mounting type of Through Holeon this device. In the presence of the supply voltage of [0], it can operate more reliably. It contains 8elements. The device stores 8bits of information. It should be noted that there are more related parts under the 74F579base part number. Long-term operation at 70°Cwith acceptable electrical stability is possible. Generally, it is designed to operate over a range of temperatures with a lower temperature limit at 0°C. The frequency of the system is 100MHz. 5.5Vis the maximum voltage the device can handle. A minimum voltage of 4.5Vis available for the device. The 8input lines are used to input binary data as on/off signals. The device has a total of 8 output lines. A normal operation of this device is ensured by its use of 1circuits.
74F579PC Features
Embedded in the 20-DIP (0.300, 7.62mm) package
8 bits per element
Frequency of 100MHz
74F579PC Applications
There are a lot of ON Semiconductor 74F579PC Counters & Dividers applications.
- Up Counters
- Divide-by-N counting
- Communications Digital Frequency Synthesizers;
- LINEARIZATION
- Binary counter/decoder
- Fixed and programmable counters greater than 10
- SQUARING
- Clocks
- Timing applications
- Control counters