74F374SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 140MHz |
| Base Part Number | 74F374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 86mA |
| Current - Output High, Low | 3mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -3mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F374SJ Overview
The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. You can find it in the Tubepackage. This output is configured with Tri-State, Non-Inverted. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of 0°C~70°C TAis used in the operation. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74F series. Its output frequency should not exceed 140MHz Hz. In total, it contains 1 elements. During its operation, it consumes 86mA quiescent energy. The 74F374 family contains it. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device's clock edge trigger type is Positive Edge. It is designed with a number of bits of 8. Due to its superior flexibility, it uses 8 circuits. Optimal efficiency requires a supply voltage of 5V. The JK flip flop is with 3 output lines to operate. Currently, there are 8 lines of input. It is set to -3mAfor the high level output current. A 24mAvalue is set for low-level output current. If the operating temperature is lower than 70°C, it is recommended. Operating temperatures should be above 0°C. Initially, it requires a voltage of 4.5V as the minimum supply voltage. 5.5Vis its maximum supply voltage. This can be achieved at a frequency of 140MHz.
74F374SJ Features
Tube package
74F series
20 pins
8 Bits
74F374SJ Applications
There are a lot of ON Semiconductor 74F374SJ Flip Flops applications.
- EMI reduction circuitry
- Convert a momentary switch to a toggle switch
- Frequency division
- Synchronous counter
- Supports Live Insertion
- Buffer registers
- Power down protection
- Registers
- Dynamic threshold performance
- Shift registers