74F175SCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 140MHz |
| Base Part Number | 74F175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 34mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 4 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F175SCX Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. T flip flop uses Differentialas the output. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. The JK flip flop operates at 4.5V~5.5Vvolts. In this case, the operating temperature is 0°C~70°C TA. D-Typedescribes this flip flop. The 74Fseries comprises this type of FPGA. You should not exceed 140MHzin the output frequency of the device. The list contains 1 elements. There is a consumption of 34mAof quiescent energy. It is a member of the 74F175 family. This electronic part is mounted in the way of Surface Mount. The 16pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. Flip flops designed with 4bits are used in this part. In order to achieve its superior flexibility, 4 circuits are used. The supply voltage should be maintained at 5V for high efficiency. There are 3 output lines on it. A total of 4input lines have been provided. High level output current is set to -1mA. In the low level output current setting, the current is set to 20mA. Operating temperatures should be lower than 70°C. It is recommended that the operating temperature is higher than 0°C. A minimum supply voltage of 4.5V is required for these RS flip flops to operate. 5.5Vis its maximum supply voltage. A frequency of 140MHzcan be achieved.
74F175SCX Features
Tape & Reel (TR) package
74F series
16 pins
4 Bits
74F175SCX Applications
There are a lot of ON Semiconductor 74F175SCX Flip Flops applications.
- Pattern generators
- Latch-up performance
- Latch
- ATE
- Reduced system switching noise
- Matched Rise and Fall
- Frequency Divider circuits
- Single Down Count-Control Line
- Consumer
- Data storage