74F109PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 125MHz |
| Base Part Number | 74F109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 2 |
| Clock Frequency | 125MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 5.2 ns |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 17mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F109PC Overview
In the form of 16-DIP (0.300, 7.62mm), it has been packaged. A package named Tubeincludes it. T flip flop uses Differentialas the output. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. The operating temperature is 0°C~70°C TA. This electronic flip flop is of type JK Type. The FPGA belongs to the 74F series. It should not exceed 125MHzin terms of its output frequency. A total of 2elements are present in it. There is 17mA quiescent consumption. It is a member of the 74F109 family. There is an electronic component mounted in the way of Through Hole. The electronic flip flop is designed with pins 16. It has a clock edge trigger type of Positive Edge. It is designed with a number of bits of 2. The superior flexibility of this circuit is achieved by using 2 circuits. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It is designed with 3 output lines. This input has 2lines in it. A -1mAis set for the high level output current. A 20mAvalue is set for low-level output current. If the operating temperature is lower than 70°C, it is recommended. It is recommended that the operating temperature be greater than 0°C. It is powered by 4.5V as its minimum supply voltage. It is capable of supporting a maximum supply voltage of 5.5V. We are able to achieve a frequency of 125MHz.
74F109PC Features
Tube package
74F series
16 pins
2 Bits
74F109PC Applications
There are a lot of ON Semiconductor 74F109PC Flip Flops applications.
- Circuit Design
- Differential Individual
- Safety Clamp
- Balanced 24 mA output drivers
- Frequency division
- ESD performance
- QML qualified product
- Computing
- High Performance Logic for test systems
- Latch-up performance