74F109PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 125MHz |
| Family | F/FAST |
| Current - Quiescent (Iq) | 17mA |
| Current - Output High, Low | 1mA 20mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| fmax-Min | 90 MHz |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
74F109PC Overview
The item is packaged in 16-DIP (0.300, 7.62mm)cases. You can find it in the Tubepackage. Currently, the output is configured to use Differential. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at a temperature of 0°C~70°C TA. This D latch has the type JK Type. The FPGA belongs to the 74F series. It should not exceed 125MHzin its output frequency. The list contains 2 elements. This process consumes 17mA quiescents. A total of 16 terminations have been made. The power supply voltage is 5V. An electronic device belonging to the family F/FASTcan be found here. It reaches the maximum supply voltage (Vsup) at 5.5V. For normal operation, the supply voltage (Vsup) should be above 4.5V.
74F109PC Features
Tube package
74F series
74F109PC Applications
There are a lot of Rochester Electronics, LLC 74F109PC Flip Flops applications.
- Safety Clamp
- Single Down Count-Control Line
- Count Modes
- High Performance Logic for test systems
- Patented noise
- Latch
- QML qualified product
- CMOS Process
- Differential Individual
- Test & Measurement