74CBTLV3244QG
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5 ns |
| Quiescent Current | 10μA |
| Family | CBTLV/3B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| Height Seated (Max) | 1.75mm |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74CBTLV3244QG Overview
It is included in the QSOP in order to save board space.Its basic configuration includes terminations in the 20 range.The multiplexer is supplied with 2.5V voltage.A component pin count of 20 can be found on this turn signal switch.As a result, conductors end at GULL WING.Single is used as its supply type.A configuration of 20 pins is used.The mount is in Surface Mount.The logic switch is a member of the family of CBTLV/3B.Signal multiplexer consists of 8 bits.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 10μA current.The resistance is 2.A maximum temperature of 85°C is acceptable for this signal switch.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.The relevant device specification specifies a maximum supply voltage of 3.6V for the signal switches.A minimum supply voltage of 2.3V is specified for the digital swith by its applicable specification.In order to implement its logic, it makes use of IC BUS DRIVER.
74CBTLV3244QG Features
Supplied in the QSOP package
Adopting a supply type of Single
BUS DRIVER as the logic IC
74CBTLV3244QG Applications
There are a lot of Integrated Device Technology (IDT) 74CBTLV3244QG Signal Switches / Multiplexers / Decoders applications.
- Combinational circuit
- Control unit of Central Processing unit (CPU)
- Computer memory
- Memory system of computers
- LVDS
- Speed control of medern motors
- Logic circuits
- Analog to digital conversion
- Time division multiplexing system
- A/D converters