Parameters |
Factory Lead Time |
6 Weeks |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
56-TFSOP (0.240, 6.10mm Width) |
Number of Pins |
56 |
Weight |
252.792698mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
56 |
Type |
Bus Switch |
Resistance |
7Ohm |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Base Part Number |
74CBT16211 |
Pin Count |
56 |
Operating Supply Voltage |
5V |
Circuit |
12 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
24 |
Propagation Delay |
250 ps |
Quiescent Current |
3μA |
Turn On Delay Time |
9.3 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
14mm |
Width |
6.1mm |
Thickness |
1.15mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74CBT16211ADGGRE4 Overview
Digital switch is provided in the 56-TFSOP (0.240, 6.10mm Width) for the purpose of saving board space.In this case, it is packaged as Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.The turn signal switch is designed for use with a 4V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers from the 74CBT series can be used in a wide range of applications.There are 56 terminations included in its basic configuration.To find signal switch's related components, a base part number of 74CBT16211 may also be used.The multiplexer's system works with 5V voltage.This turn signal switch consists of 56 component pins.As a result, GULL WING represents the end of the conductors.In this case, the supply type is Single.This multiplexer ic is configured with 56 pins.It is mounted in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 24 bits provided.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.The power supply of 5V is provided for mux switch's normal operation.Bus Driver/Transceivers is a category for the digital switch ics.Not being affected by the external factors, consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The switches packaging is based on TR.The resistance is 2.A resistance of 7Ohm is used to operate the signal switching.The output current of 64mA is provided for higher switches' flexibility.
74CBT16211ADGGRE4 Features
Supplied in the 56-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74CBT16211ADGGRE4 Applications
There are a lot of Texas Instruments 74CBT16211ADGGRE4 Signal Switches / Multiplexers / Decoders applications.
- Signal router
- Memory chips
- Automatic Monitoring systems
- War field flying robot with a night vision flying camera
- HDMI applications
- Transmission from the computer system of a satellite
- Recording transmission
- Electronic circuits
- GLAN
- A robotic vehicle with the metal detector