74AVCH8T245BQ,118
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74AVCH |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AVCH8T245 |
| Pin Count | 24 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 15.9 ns |
| Quiescent Current | 70μA |
| Turn On Delay Time | 15.9 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 380Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Length | 5.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AVCH8T245BQ,118 Overview
There is an embedded version of it in package 24-VFQFN Exposed Pad.Packaged in the way of Tape & Reel (TR).In this configuration, the output is set to Tri-State, Non-Inverted.Its translator type is Voltage Level.Mounting this electronic component follows the Surface Mount method.The Channel type of this electrical device is Bidirectional.Operation is performed at -40°C~125°C TA.Its superior flexibility is achieved by using 1 circuits.To end a transmission line, there are 24 types of termination that can be used.Parts related to a base part number 74AVCH8T245 are designated by the same number.This device is powered by a supply voltage of 1.2V which is applied to it.There are 24 pins on this device.There are a number of devices in the 74AVCH series.In addition, it is designed with a pin number of 24.Electronic parts with 8 bits are designed for this application.The maximum supply voltage is 3.6V.With a minimum supply voltage of 800mV, it operates.0.8V~3.6V is the configuration of the VCCA supply rail.The VCCB supply rail is configured from 0.8V~3.6V.Mounting this electronic component is done using the Surface Mount method.Level translators is 8 channels.In this case, the logic IC is BUS TRANSCEIVER.The 2 terminations involve matching the characteristic impedance of a transmission line to the device that ends the line.Level translators is a member of the AVC family of electronic devices.Level translators consumes 70μA quiescent current and is not affected by external factors.
74AVCH8T245BQ,118 Features
24-VFQFN Exposed Pad package
1 circuits
24 pin count
74AVCH series
24 pins
74AVCH8T245BQ,118 Applications
There are a lot of Nexperia USA Inc. 74AVCH8T245BQ,118 voltage translators & level shifters applications.
- Personal Electronics
- UART
- TVs
- Enterprise
- Test Site
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Infotainment Head Unit
- One Fabrication Site
- SDIO
- PMBus