74AVCH4T245PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AVCH |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AVCH4T245 |
| Pin Count | 16 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Max Voltage Rating (DC) | 3.6V |
| Propagation Delay | 3.3 ns |
| Quiescent Current | 70μA |
| Turn On Delay Time | 14.7 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 380Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Max Supply Voltage (DC) | 3.6V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 0.8V~3.6V |
| Voltage - VCCB | 0.8V~3.6V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AVCH4T245PW,118 Overview
There is an embedded version of it in package 16-TSSOP (0.173, 4.40mm Width).This package has the format of Tape & Reel (TR).The output it is configured with uses Tri-State, Non-Inverted.There is a translator type of Voltage Level for this electrical device.Level translators is mounted according to the Surface Mount method.The Channel type of this electrical device is Bidirectional.Level translators is -40°C~125°C TA at the operating temperature.2 circuits are used to provide this superior level of flexibility.Transmission lines can be terminated using 16 terminations to end them.Based on this base part number 74AVCH4T245, its related parts can be identified.In order to power the device, a voltage supply of 1.1V is required.There are 16 pins on it.There are a number of devices in the series 74AVCH that belong to it.The board has 16 pins.An electronic part with 2 bits is designed.The maximum supply voltage is 3.6V.With a minimum supply voltage of 800mV, it operates.VCCA is configured with a supply rail that starts at 0.8V~3.6V.From 0.8V~3.6V, the supply rail of the VCCB is configured.Using the method of Surface Mount, this electronic component is mounted.4 channels are available.As for the logic IC it uses, it is a BUS TRANSCEIVER.2 terminations are possible, which each match the transmission line's characteristic impedance.Level translators is a member of the AVC family of electronic devices.Level translators consumes 70μA of quiescent current wLevel translatorshout being affected by outside factors.
74AVCH4T245PW,118 Features
16-TSSOP (0.173, 4.40mm Width) package
2 circuits
16 pin count
74AVCH series
16 pins
74AVCH4T245PW,118 Applications
There are a lot of Nexperia USA Inc. 74AVCH4T245PW,118 voltage translators & level shifters applications.
- Controlled Baseline
- Tablet
- PMBus
- SMBus
- Infotainment Head Unit
- Products With Many I
- Test Site
- Public Signage
- Automotive infotainment
- Eliminate Slow or Noisy Input Signals