74AVCA164245VRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TFSOP |
| Number of Pins | 48 |
| Weight | 123.490523mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO SEPARATE CONFIGURABLE POWER SUPPLY FOR PORT A AND PORT B |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.4mm |
| Pin Count | 48 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 1.5/3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.4V |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Current - Output | 12mA |
| Number of Bits | 16 |
| Propagation Delay | 10.8 ns |
| Turn On Delay Time | 2.4 ns |
| Family | AVC |
| Logic Function | Transceiver, Translator |
| Data Rate | 400 Mbps |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 6.8 ns |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Translation | 1.5/3.3V&1.5/3.3V |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
74AVCA164245VRG4 Overview
In the TFSOP package, it is embedded.Packaged as Tape and Reel.Usually, when a transmission line is terminated, there are 48 termination points used.In order for it to operate, it needs to be powered by a voltage of 1.5V.A total of 48 pins are included.Level translators is designed wLevel translatorsh 48 pins.Level translators is designed wLevel translatorsh 16 bLevel translatorss.There is a maximum voltage of 3.6V supported.The minimal voltage for operation is 1.4V.This electronic part is mounted in the way of Surface Mount.This part is included in Bus Driver/Transceivers.Level translators uses a logic IC of type BUS TRANSCEIVER.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.This electronic device belongs to the family of AVC.In order for Level translators to operate, level translators needs a power supply of 1.5/3.3V.Also, TWO SEPARATE CONFIGURABLE POWER SUPPLY FOR PORT A AND PORT B characterize it.A temperature of at least [0°C] should be used for the operation.The operating temperature should be lower than 85°C.There are 2 elements in it.This device features maximum design flexibility due to its output current of 12mA.
74AVCA164245VRG4 Features
TFSOP package
48 pin count
48 pins
1.5/3.3V power supplies
2 elements
74AVCA164245VRG4 Applications
There are a lot of Texas Instruments 74AVCA164245VRG4 voltage translators & level shifters applications.
- Telecom
- Controlled Baseline
- Tablet
- Power-sensitive applications
- Infotainment Head Unit
- Tablet PCs
- Personal computers
- Routers (routing equipment)
- Extended Product-Change Notification
- SDIO