74AUP1G79GW,125
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.1V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AUP1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Circuits | 1 |
| Output Current | 20mA |
| Number of Bits | 1 |
| Clock Frequency | 309MHz |
| Propagation Delay | 17.3 ns |
| Quiescent Current | 500nA |
| Turn On Delay Time | 2 ns |
| Family | AUP/ULP/V |
| Current - Output High, Low | 4mA 4mA |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 0.8pF |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 4 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AUP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
74AUP1G79GW,125 Overview
5-TSSOP, SC-70-5, SOT-353is the packaging method. It is included in the package Tape & Reel (TR). Non-Invertedis the output configured for it. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 0.8V~3.6Vis used as the supply voltage. A temperature of -40°C~125°C TAis used in the operation. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74AUP series. In order for it to function properly, its output frequency should not exceed 309MHz. The number of terminations is 5. Members of the 74AUP1G79family make up this object. Power is supplied from a voltage of 1.1V volts. This JK flip flop has a 0.8pFfarad input capacitance. Electronic devices of this type belong to the AUP/ULP/Vfamily. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 5 pins. This device has Positive Edgeas its clock edge trigger type. There are 1bits in its design. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). Keeping the supply voltage (Vsup) above 0.8V is necessary for normal operation. The superior flexibility of this circuit is achieved by using 1 circuits. The 20mA output current allows it to be designed with the greatest amount of flexibility. It consumes 500nA current.
74AUP1G79GW,125 Features
Tape & Reel (TR) package
74AUP series
5 pins
1 Bits
74AUP1G79GW,125 Applications
There are a lot of Nexperia USA Inc. 74AUP1G79GW,125 Flip Flops applications.
- Data transfer
- Data storage
- Parallel data storage
- Power down protection
- Control circuits
- Common Clocks
- Circuit Design
- Guaranteed simultaneous switching noise level
- High Performance Logic for test systems
- Instrumentation