74AUP1G373GW-Q100H
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74AUP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-G6 |
| Output Type | Tri-State |
| Circuit | 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.8V |
| Number of Bits | 1 |
| Quiescent Current | 500nA |
| Turn On Delay Time | 2.5 ns |
| Family | AUP/ULP/V |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 25.9 ns |
| Independent Circuits | 1 |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
74AUP1G373GW-Q100H Overview
It is embedded in the 6-TSSOP, SC-88, SOT-363 package. Tape & Reel (TR) is the packaging method. It is configured with an output of Tri-State. This electrical device has Logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. In order for it to operate, it needs a supply voltage of 0.8V~3.6V. A temperature of -40°C~125°C is set as the operating temperature. The Automotive, AEC-Q100, 74AUP series of FPGAs is the one this FPGA belongs to. It is designed with 1 bits. As far as this device is concerned, it has no terminations. The device is operated when the supply voltage is set to 1.1V. There are 6 pins on it. There is a device in this electronic family called AUP/ULP/V. The electronic part is mounted using the Surface Mount method. During this period, the maximum supply voltage (Vsup) reaches 3.6V. A supply voltage (Vsup) greater than 0.8V is required. There are no external factors that affect it, so it consumes 500nA quiescent current.
74AUP1G373GW-Q100H Features
6-TSSOP, SC-88, SOT-363 package
Automotive, AEC-Q100, 74AUP series
1 Bits
6 pin count
74AUP1G373GW-Q100H Applications
There are a lot of Nexperia USA Inc. 74AUP1G373GW-Q100H Latches applications.
- Shift Registers
- OC-48 communication systems
- Data acquisition
- Timers
- PCs and Notebooks
- Parallel data synchronization
- Meter applications
- Accumulator Registers
- Watches
- Network Switches