74ALVT16374DGG,512
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | USER SELECTABLE 3.3V VCC |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVT16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Power Supplies | 3.3V |
| Number of Ports | 2 |
| Clock Frequency | 250MHz |
| Current - Quiescent (Iq) | 100μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 24mA; 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.2ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 5.4 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Propagation Delay (tpd) | 4.5 ns |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74ALVT16374DGG,512 Overview
The flip flop is packaged in a case of 48-TFSOP (0.240, 6.10mm Width). Package Tubeembeds it. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 2.3V~2.7V 3V~3.6V. Temperature is set to -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74ALVT series. You should not exceed 250MHzin its output frequency. The element count is 2 . Despite external influences, it consumes 100μAof quiescent current. The number of terminations is 48. The 74ALVT16374family includes it. The power supply voltage is 2.5V. A JK flip flop with a 3pFfarad input capacitance is used here. It is part of the FF/Latchesbase part number family. A total of 3.3V power supplies are needed to run it. This flip flop has a total of 2ports. Furthermore, it has USER SELECTABLE 3.3V VCCas a characteristic.
74ALVT16374DGG,512 Features
Tube package
74ALVT series
3.3V power supplies
74ALVT16374DGG,512 Applications
There are a lot of NXP USA Inc. 74ALVT16374DGG,512 Flip Flops applications.
- QML qualified product
- Patented noise
- Bus hold
- Synchronous counter
- Balanced Propagation Delays
- CMOS Process
- Storage Registers
- Single Down Count-Control Line
- Communications
- Automotive