74ALVT16374DGG,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | CAN ALSO OPERATE AT 3.3V SUPPLY |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ALVT16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Power Supplies | 3.3V |
| Number of Ports | 2 |
| Clock Frequency | 250MHz |
| Current - Quiescent (Iq) | 100μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 24mA; 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.2ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 5.4 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Propagation Delay (tpd) | 4.5 ns |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74ALVT16374DGG,112 Overview
In the form of 48-TFSOP (0.240, 6.10mm Width), it has been packaged. It is included in the package Tube. As configured, the output uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 2.3V~2.7V 3V~3.6V volts, it operates. It is operating at -40°C~85°C TA. D-Typeis the type of this D latch. In FPGA terms, D flip flop is a type of 74ALVTseries FPGA. Its output frequency should not exceed 250MHz. A total of 2elements are present in it. It consumes 100μA of quiescent current without being affected by external factors. The number of terminations is 48. If you search by 74ALVT16374, you will find similar parts. The power source is powered by 2.5V. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This device has the base part number FF/Latches. It runs on 3.3Vvolts of power. A total of 2ports are embedded in the D flip flop. There is also a characteristic of CAN ALSO OPERATE AT 3.3V SUPPLY.
74ALVT16374DGG,112 Features
Tube package
74ALVT series
3.3V power supplies
74ALVT16374DGG,112 Applications
There are a lot of NXP USA Inc. 74ALVT16374DGG,112 Flip Flops applications.
- Differential Individual
- Single Up Count-Control Line
- Matched Rise and Fall
- Consumer
- Synchronous counter
- Count Modes
- Storage registers
- Shift Registers
- 2 – Bit synchronous counter
- CMOS Process