74ALVCH32244BFG8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Number of Pins | 96 |
| Packaging | Tape and Reel |
| Published | 2009 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 96 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN SILVER COPPER |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 96 |
| Number of Outputs | 32 |
| Number of Elements | 8 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Propagation Delay | 5.7 ns |
| Quiescent Current | 40μA |
| Turn On Delay Time | 5.7 ns |
| Family | ALVC/VCX/A |
| Logic Function | Buffer, Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 3 ns |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | ENABLE LOW |
| Height Seated (Max) | 1.5mm |
| Length | 13.5mm |
| Width | 5.5mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ALVCH32244BFG8 Overview
Tape and Reel external packaging. All of the 8 elements are put into use. 96 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. There is a ALVC/VCX/A family part that is attached to this electronic component. 96 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 96 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 40μA. It is recommended to use a 3.3V power supply. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 24mA to its low level. In high level output mode, the electronic parts may conduct -24mA of current. Voltage used to run voltage buffer should be 2.3V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. It is known as a BUS DRIVER logic IC. It is sufficient to make 32 outputs.
74ALVCH32244BFG8 Features
Bus Driver/Transceivers
High Level Output: 24mA
Low Level Output: -24mA
BUS DRIVER Logic IC
74ALVCH32244BFG8 Applications
There are a lot of Integrated Device Technology (IDT) 74ALVCH32244BFG8 Buffers & Transceivers applications.
- Wired telephone
- Wireless multimedia center in smart home
- Indoor ad hoc meeting
- Satellite ground stations
- Laser diode bonding
- Fiber distributed data interface (FDDI)
- Structural bonding
- Military satellite communications
- Data center
- Bar, KTV wireless entertainment