74ALVCH16260PAG
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 12 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 56 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Number of Bits | 12 |
| Propagation Delay | 6.9 ns |
| Turn On Delay Time | 1 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | MULTIPLEXER AND DEMUX/DECODER |
| High Level Output Current | 24mA |
| Low Level Output Current | 24mA |
| Independent Circuits | 1 |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
74ALVCH16260PAG Overview
In the TSSOP package, it is embedded. This electronic part is designed with 12 Bits. There are 56 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The device works with a voltage of 3.3V for its supply voltage. It is equipped with 56 pin count. ALVC/VCX/A is the family name of this electronic device. This board has 56 pins on it, which is what it is designed for. Mounting this electronic component follows the Surface Mount method. There is a subcategory of Other Logic ICs for this part. High efficiency requires a voltage supply of 3.3V. It is set to zero for the low level output current. 24mA is set as the high level output current. Ideally, the operating temperature should be lower than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. The supply voltage is limited to 3.6V. There is a minimum supply voltage of 2.7V for it. As for the logic IC it uses, it is a MULTIPLEXER AND DEMUX/DECODER.
74ALVCH16260PAG Features
TSSOP package
12 Bits
56 pin count
56 pins
74ALVCH16260PAG Applications
There are a lot of Integrated Device Technology (IDT) 74ALVCH16260PAG Latches applications.
- Watches
- Digital bus buffer
- Automotive Body Electronics
- Automotive Infotainment
- BCD counting
- Hammer
- Accumulator Registers
- Parallel Output
- Counter
- OC-48 communication systems