74ALVCF162834VRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 56 |
| Weight | 145.007811mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVCF |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ALVCF162834 |
| Pin Count | 56 |
| Number of Outputs | 18 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 18-Bit |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 5.6 ns |
| Family | ALVC/VCX/A |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 18mA 18mA |
| Logic Type | Universal Bus Driver, CMOS |
| Height Seated (Max) | 1.2mm |
| Length | 11.3mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ALVCF162834VRG4 Overview
Embedded in the 56-TFSOP (0.173, 4.40mm Width) package, it is used by many applications. In this case, it is packaged in the same way as Tape & Reel (TR). A 18-Bit circuit achieves its superior flexibility by using 18-Bit components. This electrical device has a logic type of Universal Bus Driver, CMOS, which means that it is a logic device. A Surface Mount-shaped electronic component is mounted here. A higher operating temperature than -40°C~85°C is recommended. The High/Low output current of 18mA 18mA makes it feature maximum design flexibility. A 74ALVCF series FPGA is a type of FPGA that is part of the family of FPGAs. There is a supply voltage of 2.3V~3.6V that it operates on. As it belongs to the 74ALVCF162834 family, it should be taken into consideration. The 56 termination is a practice in which a transmission line is terminated with an impedance matching device at the end of the line in order to match the characteristic impedance of the line. Normal operation requires an output voltage above 2.5V. There are a total of 96 pins on this device. The electronic part was designed using 18 Bits. There are a number of termination types, including 2 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. In this case, the electronic part is mounted in the direction of Surface Mount. 56 pins are used in the design. The device belongs to the ALVC/VCX/A family of electronic devices. The maximal supply voltage (Vsup) reaches 3.6V. It is recommended that the supply voltage (Vsup) be greater than 2.3V. The outputs are configured with 18.
74ALVCF162834VRG4 Features
56-TFSOP (0.173, 4.40mm Width) package
74ALVCF series
74ALVCF162834 family
56 pin count
56 pins
18 outputs
74ALVCF162834VRG4 Applications
There are a lot of Texas Instruments 74ALVCF162834VRG4 Universal Bus Functions applications.
- Digital stopwatches
- Various travel, camping, medical emergency appliances
- Reactive power compensation function
- Instrumentation Systems
- Small and medium off-grid systems
- Laptop
- Digital system
- Sewing machine
- automatic temperature control circuits
- Refrigerator