74ALVC74PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Circuits | 2 |
| Clock Frequency | 425MHz |
| Propagation Delay | 2.3 ns |
| Quiescent Current | 200nA |
| Turn On Delay Time | 3.7 ns |
| Family | ALVC/VCX/A |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 3.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 1 |
| fmax-Min | 300 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ALVC74PW,112 Overview
The flip flop is packaged in 14-TSSOP (0.173, 4.40mm Width). A package named Tubeincludes it. T flip flop is configured with an output of Differential. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 1.65V~3.6V. In the operating environment, the temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74ALVC series. In order for it to function properly, its output frequency should not exceed 425MHz. It consumes 10μA of quiescent current without being affected by external factors. It has been determined that there have been 14 terminations. The 74ALVC74family includes it. Power is supplied from a voltage of 1.8V volts. This T flip flop has a capacitance of 3.5pF farads at the input. This D flip flop belongs to the family of ALVC/VCX/A. A part of the electronic system is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. Vsup reaches 3.6V, the maximal supply voltage. 2 circuits are used to achieve its superior flexibility. It is designed with 1 output lines. In terms of quiescent current, it consumes 200nA .
74ALVC74PW,112 Features
Tube package
74ALVC series
14 pins
74ALVC74PW,112 Applications
There are a lot of Nexperia USA Inc. 74ALVC74PW,112 Flip Flops applications.
- 2 – Bit synchronous counter
- Individual Asynchronous Resets
- Guaranteed simultaneous switching noise level
- Test & Measurement
- Load Control
- Frequency Divider circuits
- Data storage
- Balanced Propagation Delays
- Asynchronous counter
- Event Detectors