74ALVC162374TX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ALVC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 1.65V~3.6V |
| Frequency | 200MHz |
| Base Part Number | 74ALVC162374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Number of Bits | 16 |
| Clock Frequency | 250MHz |
| Propagation Delay | 5.3 ns |
| Turn On Delay Time | 3.9 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.9ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -6mA |
| Input Capacitance | 6pF |
| Low Level Output Current | 6mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ALVC162374TX Overview
In the form of 48-TFSOP (0.240, 6.10mm Width), it has been packaged. You can find it in the Tape & Reel (TR)package. The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V volts, it operates. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 74ALVC series. This D flip flop should not have a frequency greater than 250MHz. In total, there are 2 elements. This process consumes 40μA quiescents. Members of the 74ALVC162374family make up this object. This JK flip flop has a 6pFfarad input capacitance. Electronic part Surface Mountis mounted in the way. This board has 48 pins. It has a clock edge trigger type of Positive Edge. The flip flop is designed with 16bits. Its flexibility is enhanced by 2 circuits. It is designed with 3 output lines. Currently, there are 8 input lines present. It is set to -6mAfor the high level output current. There is 6mA output current at the low level. Ideally, the operating temperature should be lower than 85°C. It should be higher than -40°Cwhen the system is operating. The RS flip flop is designed to operate with a minimal supply voltage of 1.65VV. 3.6Vis the maximum supply voltage it supports. This can be achieved at a frequency of 200MHz.
74ALVC162374TX Features
Tape & Reel (TR) package
74ALVC series
48 pins
16 Bits
74ALVC162374TX Applications
There are a lot of ON Semiconductor 74ALVC162374TX Flip Flops applications.
- Single Up Count-Control Line
- Asynchronous counter
- Matched Rise and Fall
- Cold spare funcion
- Modulo – n – counter
- Storage Registers
- Balanced Propagation Delays
- Latch-up performance
- Counters
- Test & Measurement