74AHCT595T16-13
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| Series | 74AHCT |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Propagation Delay | 3.8 ns |
| Quiescent Current | 4μA |
| Family | AHCT/VHCT/VT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| fmax-Min | 90 MHz |
| Max Frequency@Nom-Sup | 90000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74AHCT595T16-13 Overview
The device is embedded in 16-TSSOP (0.173, 4.40mm Width) package. Taking the total number of terminations on the chip and adding them up, we get 16. There is a Cut Tape (CT) case containing it. This part has an operating supply voltage of 5V. 16 pins are available on the device. It is recommended that the mount should be done by Surface Mount. Electronic components fall under the category of AHCT/VHCT/VT. Surface Mount is the way in which this component is mounted. There is a temperature range of -40°C~125°C. Votage is supplied within 4.5V~5.5V. In this case, the electrical component belongs to the series 74AHCT. For this part, Vsup should not be less than 4.5V. This device has 1 input lines available. A device capable of delivering voltage at 5V can be used. The maximum supply voltage (Vsup) for this part should not be more than 5.5V. A quiescent current of 4μA is used to run the device.
74AHCT595T16-13 Features
With 16 pins
Mounted in Surface Mount type.
It supplies 5V power
Quiescent Current at 4μA
74AHCT595T16-13 Applications
There are a lot of Diodes Incorporated 74AHCT595T16-13 Shift Registers applications.
- Serial-to-parallel data conversion
- Remote control holding register
- data manipulation
- Delay Line
- Parallel to serial converter
- LED matrix control
- ROM Chips
- Sequence generator
- 8-bit data storage
- Data manipulation