74AHCT377D,118
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 5.7 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHCT377D,118 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. There is a Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. In this case, the operating temperature is -40°C~125°C TA. D-Typedescribes this flip flop. It belongs to the 74AHCTseries of FPGAs. It should not exceed 130MHzin its output frequency. There are 1 elements in it. There is 4μA quiescent consumption. The number of terminations is 20. The object belongs to the 74AHCT377 family. An input voltage of 5Vpowers the D latch. This T flip flop has a capacitance of 3pF farads at the input. It belongs to the family of electronic devices known as AHCT/VHCT. There is an electronic component mounted in the way of Surface Mount. The 20pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. Flip flops designed with 8bits are used in this part. Optimal efficiency requires a supply voltage of 5V. The number of input lines is 8.
74AHCT377D,118 Features
Tape & Reel (TR) package
74AHCT series
20 pins
8 Bits
74AHCT377D,118 Applications
There are a lot of Nexperia USA Inc. 74AHCT377D,118 Flip Flops applications.
- Synchronous counter
- Digital electronics systems
- Power down protection
- Memory
- Patented noise
- Balanced 24 mA output drivers
- ESCC
- Frequency Dividers
- Frequency division
- Data Synchronizers