74AHCT273PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Output Current | 25mA |
| Number of Bits | 8 |
| Clock Frequency | 75MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 5.8 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 9.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| fmax-Min | 65 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHCT273PW,118 Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. A package named Tape & Reel (TR)includes it. Non-Invertedis the output configured for it. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. It is operating at a temperature of -40°C~125°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74AHCT series. There should be no greater frequency than 75MHzon its output. A total of 1elements are present in it. This process consumes 4μA quiescents. There have been 20 terminations. The 74AHCT273family includes it. Power is provided by a 5V supply. A 3pFfarad input capacitance is provided by this T flip flop. AHCT/VHCTis the family of this D flip flop. There is an electronic component mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device's clock edge trigger type is Positive Edge. 8bits are used in its design. Optimal efficiency requires a supply voltage of 5V. The output current of 25mA makes it feature maximum design flexibility. 8input lines are available for you to choose from.
74AHCT273PW,118 Features
Tape & Reel (TR) package
74AHCT series
20 pins
8 Bits
74AHCT273PW,118 Applications
There are a lot of Nexperia USA Inc. 74AHCT273PW,118 Flip Flops applications.
- Patented noise
- 2 – Bit synchronous counter
- Cold spare funcion
- Reduced system switching noise
- Shift registers
- Bus hold
- Buffer registers
- Power down protection
- Computers
- Individual Asynchronous Resets