74AHCT1G66GW,165
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 22Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT1G66 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 75mA |
| Power Dissipation | 250mW |
| Max Supply Current | 75mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 10 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 11 ns |
| -3db Bandwidth | 280MHz |
| On-State Resistance (Max) | 22Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 11ns, 11ns |
| Switching | MAKE-BEFORE-BREAK |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Normal Position | NO |
| Length | 2mm |
| RoHS Status | RoHS Compliant |
74AHCT1G66GW,165 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 5-TSSOP, SC-70-5, SOT-353. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Operation at a temperature around -40°C~125°C TA. In total, 5 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. When a voltage supply of 5V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 5 pins. Unlike digital switches, these are based on SPST - NO switching circuits. Use 74AHCT1G66 to search for variants of the digital switches. There is 22Ohm internal resistance in this digital multiplexer. To find out what the 5 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The digital multiplexer has a low cost Single supply. A low voltage of 4.5V should be applied to the electronic component. This multiplexer would work with 1μA current. Using a single voltage supply, this switch device consumes 4.5V~5.5V volts. Putting voltage greater than 75mA on the multiplexer may cause damage. Operating voltages range from 5V. A 1 input needs to be operated.
74AHCT1G66GW,165 Features
1 Channels
Switch Circuit: SPST - NO
1μA Supply Current
-3db Bandwidth: 280MHz
74AHCT1G66GW,165 Applications
There are a lot of Nexperia USA Inc. 74AHCT1G66GW,165 Analog Switches & Multiplexers ICs applications.
- SONET
- Battery Powered Systems
- PBXs
- Digital cross connects (DSX-1)
- Fiber to the Home
- PBX interfaces
- Sample hold systems
- Precision test equipment
- Relay replacements
- Communication systems