74AHC74PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AHC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Output Current | 25mA |
| Clock Frequency | 115MHz |
| Propagation Delay | 20 ns |
| Quiescent Current | 2μA |
| Family | AHC/VHC/H/U/V |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74AHC74PW-Q100J Overview
The item is packaged in 14-TSSOP (0.173, 4.40mm Width)cases. It is contained within the Tape & Reel (TR)package. It is configured with Differentialas an output. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 2V~5.5V. -40°C~125°C TAis the operating temperature. D-Typedescribes this flip flop. The FPGA belongs to the 74AHC series. In order for it to function properly, its output frequency should not exceed 115MHz. A total of 2elements are present in it. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74AHC74family includes it. An input voltage of 5Vpowers the D latch. JK flip flop input capacitance is 3pF farads. It belongs to the family of electronic devices known as AHC/VHC/H/U/V. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. Its clock edge trigger type is Positive Edge. A normal operating voltage (Vsup) should remain above 2V. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It offers maximum design flexibility with its output current of 25mA. There is a consumption of 2μAof quiescent current from it.
74AHC74PW-Q100J Features
Tape & Reel (TR) package
74AHC series
14 pins
74AHC74PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74AHC74PW-Q100J Flip Flops applications.
- Automotive
- Buffered Clock
- EMI reduction circuitry
- Counters
- Cold spare funcion
- Consumer
- Individual Asynchronous Resets
- Storage registers
- Instrumentation
- Divide a clock signal by 2 or 4