74AHC595S16-13
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AHC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 5.7 ns |
| Quiescent Current | 4μA |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| fmax-Min | 90 MHz |
| Max Frequency@Nom-Sup | 40000000Hz |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHC595S16-13 Overview
In package 16-SOIC (0.154, 3.90mm Width), there is an embedded device. The number of the chip's terminations sums up to 16. The Tape & Reel (TR) case contains it. There is 5V operating supply voltage listed on the part. 16 pins are located on the device. It is recommended that the mount should be done by Surface Mount. Electronic components belong to the AHC/VHC/H/U/V group. The component is positioned in the way of Surface Mount. There is a range of temperatures -40°C~125°C for operation. It is supplied with voltage within 2V~5.5V. This electrical component belongs to the 74AHC series. This part must have a minimum supply voltage (Vsup) of 2V. In this device, there are 1 input lines. Devices with voltage delivery capabilities of 2.5/5V are available. It should not exceed 5.5V in terms of the supply voltage (Vsup). A quiescent current of 4μA is used to run the device.
74AHC595S16-13 Features
With 16 pins
Mounted in Surface Mount type.
It supplies 2.5/5V power
Quiescent Current at 4μA
74AHC595S16-13 Applications
There are a lot of Diodes Incorporated 74AHC595S16-13 Shift Registers applications.
- Pattern Recognizers
- store data in digital form
- Output expansion
- Data Format Converters
- 7-segment display control
- ROM Chips
- Delay Line
- data transfer
- Serial-to-parallel data conversion
- Remote control holding register