74AHC594DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC594 |
| Function | Serial to Parallel, Serial |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 15.6 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC594DB,118 Overview
In package 16-SSOP (0.209, 5.30mm Width), there is an embedded device. This chip has a total termination count of 16. A Tape & Reel (TR) case is used to pack it. The part operates at 5V voltage. 16 pins are located on the device. It is recommended that the mount should be done by Surface Mount. Electronic components are categorized as HC/UH. The component is positioned in the way of Surface Mount. There is a range of operating temperatures -40°C~125°C. During operation, the voltage is within the range of 2V~5.5V. The 74AHC series is associated with this electrical component. The 74AHC594 family can be used to find similar parts. As noted, this chip operates within the range of 5V. For this part, the minimum supply voltage (Vsup) should not be less than 2V. This device has 1 input lines available. It is necessary to operate 9 output lines of the system.
74AHC594DB,118 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC594 family
Operate supply voltage at 5V
With 9 output lines
74AHC594DB,118 Applications
There are a lot of Nexperia USA Inc. 74AHC594DB,118 Shift Registers applications.
- Remote control holding register
- 8-bit data storage
- Pattern Recognizers
- ROM Chips
- Counter
- 7-segment display control
- data transfer
- Output expansion
- Serial-to-parallel data conversion
- Generate time delay toward digital circuits