74ACTQ843SPC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Supplier Device Package | 24-PDIP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACTQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACTQ843 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 9:9 |
| Polarity | Non-Inverting |
| Number of Circuits | 9 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 9 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 6.2 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 9 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 6.2ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACTQ843SPC Overview
The package in which it is embedded is named 24-DIP (0.300, 7.62mm). Tube is the packaging method. It uses the output configuration Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. A Through Hole mount is used for mounting this electronic part. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C. An FPGA in this series belongs to the 74ACTQ family. This electronic part is designed with 9 Bits. 74ACTQ843 is its family. 24 pins are used in its design. Through Hole is used to mount this electronic part. There are electronic circuits attached to the 9 input lines. Optimal efficiency requires 5V as the supply voltage. 3 output lines provide binary equivalents of input lines. This object is composed of 1 elements. The superior flexibility of the system is achieved through its use of 9 circuits. It is set to zero for the low level output current. It has been set to -24mA for the high level output current. Operating temperatures should be below 85°C. There should be a temperature above -40°C at which the device operates. Voltages up to 5.5V can be supplied. It operates with the minimal supply voltage of 4.5V.
74ACTQ843SPC Features
24-DIP (0.300, 7.62mm) package
74ACTQ series
9 Bits
74ACTQ843 family
24 pins
1 elements
74ACTQ843SPC Applications
There are a lot of ON Semiconductor 74ACTQ843SPC Latches applications.
- Bus system register with enable parallel lines at bus side
- Control circuits
- Decade counting
- Relay replacement
- Sample and hold register
- Counter
- Parallel-to-Serial Data Conversion
- Phase comparator
- Registers
- Avionics