74ACTQ574PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACTQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACTQ574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Clock Frequency | 85MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACTQ574PC Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. Package Tubeembeds it. It is configured with Tri-State, Non-Invertedas an output. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In this case, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The 74ACTQseries comprises this type of FPGA. A frequency of 85MHzshould be the maximum output frequency. D latch consists of 1 elements. It consumes 40μA of quiescent You can search similar parts based on 74ACTQ574. This JK flip flop has a 4.5pFfarad input capacitance. There is an electronic component mounted in the way of Through Hole. A total of 20pins are provided on this board. This device's clock edge trigger type is Positive Edge. The superior flexibility is achieved through the use of 8 circuits. Optimal efficiency requires a supply voltage of 5V. There are no output lines on the JK flip flop.
74ACTQ574PC Features
Tube package
74ACTQ series
20 pins
74ACTQ574PC Applications
There are a lot of ON Semiconductor 74ACTQ574PC Flip Flops applications.
- Buffer registers
- Common Clocks
- Balanced Propagation Delays
- Communications
- Differential Individual
- Patented noise
- Computers
- Frequency Divider circuits
- Latch-up performance
- Single Up Count-Control Line