74ACTQ374SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACTQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 85MHz |
| Base Part Number | 74ACTQ374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 85MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACTQ374SJ Overview
The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). The package Tubecontains it. As configured, the output uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis required for its operation. The operating temperature is -40°C~85°C TA. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 74ACTQ series. Its output frequency should not exceed 85MHz Hz. D latch consists of 1 elements. As a result, it consumes 40μA of quiescent current without being affected by external factors. This D latch belongs to the family of 74ACTQ374. JK flip flop input capacitance is 4.5pF farads. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device exhibits a clock edge trigger type of Positive Edge. Flip flops designed with 8bits are used in this part. The superior flexibility is achieved through the use of 8 circuits. Optimal efficiency requires a supply voltage of 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 1input lines have been provided. In this case, the high level output current is set to -24mA. It is set to 24mAfor the low level output current. The operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. This can be achieved at a frequency of 85MHz.
74ACTQ374SJ Features
Tube package
74ACTQ series
20 pins
8 Bits
74ACTQ374SJ Applications
There are a lot of ON Semiconductor 74ACTQ374SJ Flip Flops applications.
- Memory
- Frequency Dividers
- Data Synchronizers
- Count Modes
- Single Down Count-Control Line
- Parallel data storage
- Patented noise
- Safety Clamp
- High Performance Logic for test systems
- Balanced Propagation Delays